The online racing simulator

Car Setup Details for RandomCar base

Car & Name :
IMPREZZIVE C8 - RandomCar base -
Uploaded By :
Rating :
(0)
LFS Version :
0.7E
Access :
Public
Classification :
Sprint
Track(s) :
Any
Notes :
, by Eclipsed :
Base setup for RandomCar - series run with PL200 class cars,based on performance of LFS TBO class. 8% intake restriction is required for balancing in the series.
Make sure you adjust tyre pressures,camber and gearing to fit the specific track,work on suspension for better handling.

Setup Details

Handicaps
Voluntary Intake Restriction 8%
Brakes
Maximum Per Wheel 1200 Nm
Brake Balance (front) 64%
Suspension
Rear Front
Stiffness 60 N/mm Stiffness 80 N/mm
Damping 10 Ns/mm Damping 10.5 Ns/mm
Anti Roll 115 N/mm Anti Roll 85 N/mm
Steering
Rear Front
Toe In Maximum Lock 36°
Parallel Steer 0%
Toe In
Passengers
Front None
Front Left None
Front Right None
Final Drive
Front Gear Ratios
Type Clutch Pack LSD First 2.820
Locking (power / coast) 80% / 26% Second 2.160
Preload 70 Nm Third 1.600
Rear Fourth 1.200
Type Clutch Pack LSD Fifth 0.970
Locking (power / coast) 80% / 38% Sixth 0.617
Preload 110 Nm Seventh 0.500
Centre  
Type Viscous LSD Final Drive Ratio 3.900
Viscous Torque 17 Nms/rad
Front Torque Split 45%
Tyres
Manufacturer : Evostar
Rear Road Super Front Road Super
Pressure (L / R) 200 kPa
200 kPa
Pressure (L / R) 230 kPa
230 kPa
Camber Adjust (L / R) -2.8° / -2.8° Camber Adjust (L / R) -1.2° / -1.2°
Downforce
Front Wing Angle
Rear Wing Angle
FGED GREDG RDFGDR GSFDG