The online racing simulator

Car Setup Details for RandomCar base

Car & Name :
GT-V34 MINE9 - RandomCar base -
Uploaded By :
Rating :
(0)
LFS Version :
0.7E
Access :
Public
Classification :
Sprint
Track(s) :
Any
Notes :
, by Eclipsed :
Base setup for RandomCar - series run with PL200 class cars,based on performance of LFS TBO class. 50% intake restriction and 10kg ballast is required for balancing in the series.
Make sure you adjust tyre pressures,camber and gearing to fit the specific track,work on suspension for better handling.

Setup Details

Handicaps
Voluntary Intake Restriction 50%
Voluntary Added Mass 10 kg
Added Mass Position (front) 50%
Brakes
Maximum Per Wheel 1400 Nm
Brake Balance (front) 63%
Suspension
Rear Front
Stiffness 60 N/mm Stiffness 75 N/mm
Damping 6.4 Ns/mm Damping 6.6 Ns/mm
Anti Roll 40 N/mm Anti Roll 26 N/mm
Steering
Rear Front
Toe In 0.1° Maximum Lock 36°
Parallel Steer 0%
Toe In -0.1°
Passengers
Front None
Front Left None
Front Right None
Final Drive
Front Gear Ratios
Type Clutch Pack LSD First 3.730
Locking (power / coast) 50% / 35% Second 2.770
Preload 140 Nm Third 2.150
Rear Fourth 1.760
Type Clutch Pack LSD Fifth 1.470
Locking (power / coast) 60% / 30% Sixth 1.270
Preload 240 Nm Seventh 0.720
Centre  
Type Viscous LSD Final Drive Ratio 3.710
Viscous Torque 8 Nms/rad
Front Torque Split 40%
Tyres
Manufacturer : Evostar
Rear Road Super Front Road Super
Pressure (L / R) 190 kPa
190 kPa
Pressure (L / R) 210 kPa
210 kPa
Camber Adjust (L / R) -2.7° / -2.7° Camber Adjust (L / R) -2.6° / -2.6°
Downforce
Front Wing Angle
Rear Wing Angle 10°
FGED GREDG RDFGDR GSFDG